HP Final Finish 320 1L



Autosol High Performance Final Finish 320 is designed to easily remove swirl marks and holograms left by machine compounding.


Autosol High Performance Final Finish 320 can be used after Autosol Polishing compound to remove compound marks and insure high gloss or after Autosol Speed Gloss on dark colour paints. Gives a deep colour appearance and a high gloss finish with an exceptional mirror shine (well seen on dark colours). Suitable for all paints, including hard and scratch resistant clear coats (e.g. ceramic-coat), works on fresh or cured automotive paint surfaces. Use for removal of sanding scratches 2500-3000. Silicone free, no filler.

Out of stock

SKU: 36320 Categories: ,

How to use Autosol hologram and swirl remover:

  1. A polishing machine is required to apply this product.
  2. This product has to be used with a blue compounding foam.
  3. Apply a small amount of polish to the panel/vehicle, place machine and pad onto surface.
  4. Move pad over surface to spread product and start up rotary polisher (1500-2000 RPM) with light to medium pressure.
  5. WorkĀ half a square meter at a time until the sanding scratches are removed or high gloss achieved.
  6. Remove residue with a soft microfibre cloth.
  7. Re-apply product when moving to a new area.

TIP: This product is used as finisher, after the paint has been polished

Reviews (0)


There are no reviews yet.

Be the first to review “HP Final Finish 320 1L”