Car Detailing KIT (Professional results)

$149.95

Autosol Car Detailing Kit has everything you need to detail your car like a Professional Detailer.
Contents:
1- Autosol Power Cut 1l: Quickly eliminates overspray and leaves superior high gloss on used clear coatings. Suitable for all paint works, including hard an scratch resistant clear coats (e.g. cerami-coat), works om fresh or cured automotive paint surfaces. Use for sanding scratches 1200-2000. Silicone free, no fillers.
2- Autosol Final Finish 1l:
Use after Autosol Power Cut to remove compound marks and insure high gloss. Gives a deep colour appearance and a high gloss finish with an exceptional mirror shine (well seen on dark colours). Suitable for all paints, including hard and scratch resistant clear coats (e.g. ceramic-coat), works on fresh or cured automotive paint surfaces. Use for removal of sanding scratches 2500-3000. Silicone free, no fillers.
3- Autosol Screen wash Concentrate 250ml:
Highly concentrated windscreen wash additive with aroma. Quickly and reliably removes all stubborn dirt such as insects, oily films and waxes. Chamber pack dosage means no mess or measuring.
4- Autosol Buffing Pad.
5- Autosol Microfibre Cloth.

38 in stock

SKU: ASDKCar Categories: , Tags: ,
Instructions

HOW TO USE AUTOSOL POLISHING COMPOUND:

  1. A polishing machine is required to apply this product.
  2. This product has to be used with a lambswool or white compounding foam.
  3. Apply a small amount of polish to the panel/vehicle, place machine and pad onto surface.
  4. Move pad over surface to spread product and start up rotary polisher (1200-1400 RPM) with light to medium pressure.
  5. Work a small area at a time until the sanding scratches are removed.
  6. Remove residue with a soft microfibre cloth.
  7. Re-apply product when moving to a new area.

HOW TO USE AUTOSOL HOLOGRAM AND SWIRL REMOVER:

  1. A polishing machine is required to apply this product.
  2. This product has to be used with a blue compounding foam.
  3. Apply a small amount of polish to the panel/vehicle, place machine and pad onto surface.
  4. Move pad over surface to spread product and start up rotary polisher (1500-2000 RPM) with light to medium pressure.
  5. Work half a square meter at a time until the sanding scratches are removed or high gloss achieved.
  6. Remove residue with a soft microfibre cloth.
  7. Re-apply product when moving to a new area.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Car Detailing KIT (Professional results)”